Shop vacuums can be utilized for variety of purposes. The most common question that people ask is how to suck up liquids like water, soda, urine, wine, feces or any other liquid with the help of a shop vacuum.
So, here we are with a detailed answer and I am sure, it would be really helpful to resolve your issues regarding water pumping through shop vacuums.
Just keep one thing in your mind, if you want to use shop vacuum for water sucking, you need to adjust its position. The main reason behind this is that the process of sucking up water is different as compared to dry objects.
Usually, it is easy to suck dry materials and only a filter is required for this. On the other hand, a bag can also be used for this too.
Some people would love to use shop vacuum for cleaning a pond but they do not know “how”, the answer is very simple.
Top 5 shop vacuums for 2020[amazon bestseller=”best shop vacuum” items=”5″ template=”table”]
How To Use A Shop Vac To Pick Up Water
Remember, before initiating to suck up water, you should take out the bag and paper filter from your vacuum. Moreover, some shop vacuums offer an alternative of foam filter which can continuously stay input and you don’t have to eliminate it.
Make sure, try to read the instructions written in the booklet. But sometimes directions are mentioned on the filter whether it can be used for water pick up or not.
There is one important point to note if you have to suck water from carpets then it is mandatory to get a Sub Surface Carpet Extraction tool. Just plug it to the hose of your shop vacuum and it is quite supportive to take water out.
Some of the shop vacuums can be used without needing any filter, so if you are planning to run this vacuum without filter, the only purpose should be water sucking.
A shop vacuum offers two settings: first, with the filter turned on and the other one is water in the tank. Your vacuum cleaner will not scamper for long hours if you do not employ one of the options mentioned above.
Things To Remember
If you don’t have any extra filter in your house, it’s going to be quite annoying. Sometimes, you suck up the wrong materials with filter and in that situation, the filter is damaged. Obviously, you require a new filter; otherwise your cleaning task will be incomplete.
If you don’t want to use a filter, it would be wise enough to operate the shop vacuum only in open areas and not indoors. If you put a little water in the bottom tank of the shop vacuum, it will collect some dust particles but it will not trap all dust, except the hose moves up and down below the water and in this case the water does not act like a filter.[amazon box=”B00FX2THKO,B00002ND4E,B019C23JIQ” template=”horizontal”]
Can I Use Shop Vac Without Bag
If you want to suck up dry things then the best options is to use a bag. On the other hand just remove the bag to pickup water. If you pickup dry things without using a bag it will create a mess in the storage can. Moreover, it can also block the filter and the water leakage can also take place.
A shop vacuum can pick up the excessive water from the floors in case your basement or open yard floods. Some shop vacuums are available with output hoses to drain the water off thoroughly. A shop vacuum is not a suitable choice as a water pump for long term sucking, but it works really quickly.
Most of the shop vacuums include a float that will automatically switch off the suction of the motor if the container is full of water. Be vigilant, when the shop vacuum changes its pitch and drop all its suction, this is the high time to figure out that the tank should be emptied before continuing.
Is Shop Vac Beneficial For Cleaning Ponds
Generally it is recommended that don’t use your shop vacuum for cleaning large proportion of water or ponds. The main cause is that they usually fill up quicker than you think and get choke with the unidentified junk in the ponds.
If you want to clean big areas of water then you have to empty a shop vacuum after every twenty second. If you still want to use a shop vacuum to clean your pond then it is necessary to stick those vacuums that hold an output hose as this hose plays a vital role to keep the water to flow right back out after picking it up.
Sometimes, the output hose would never be able to maintain incoming flow of water, in that situation you will realize that you ended up from where you started.